Unc0ver now jailbreaks all iOS 11 firmware versions along with iOS 12.0-12.1.2! Originally supporting only iOS 11.0-11.4 beta 3, it has been updated with new exploits, and now covers iOS 11.0-12.1.2. As the jailbreak built with Cydia Substrate and a Saurik-approved upgrade to the Cydia app, it’s our recommendation for users looking to set their iOS 11 and 12 gadgets free.
In this tutorial, we’ll show you how to use unc0ver to jailbreak your compatible devices.
At the time of writing, the current release version of unc0ver is v3.0.0, which supports iOS 11.0-12.1.2. Users on iOS 12.1.3 and later should stay where they are and avoid updating in case of any future exploits. If you’re more of an Electra person and know the differences, you check out that instead.
How to jailbreak with unc0ver
1) Download the most recent version of unc0ver from Pwn20wnd’s GitHub page.
2) Download Cydia Impactor on your computer and launch it.
3) Connect your iPhone, iPad, or iPod touch to your computer with an MFi-certified Lightning cable.
Note: Cydia Impactor should recognize your device after you plug it in. If it doesn’t, then “Trust” your computer from your computer via the pop-up on your device, and vice-versa.
4) Click and drag the unc0ver.ipa file to the Cydia Impactor window like so:
5) Sign in with your Apple ID when prompted:
6) Cydia Impactor will now begin side-loading the unc0ver jailbreak app on your device:
7) Once installed, go to Settings → General → Profiles & Device Management and tap on your Apple ID:
8) Next, tap on the blue Trust button, and then tap on the red Trust button inside the popup that appears:
Note: Before proceeding to the next step, enable Airplane Mode, disable your passcode/Touch ID/Face ID, disable Siri, and reboot your device. Taking these additional steps isn’t mandatory, but seems to increase the tool’s success rate.
9) After taking the recommended steps above to prepare your device, tap on the unc0ver icon from your Home screen:
10) Next, tap on the blue Jailbreak button in the unc0ver app:
Note: the tool will begin jailbreaking your device; it should respring afterward.
12) Once finished, you’ll find Cydia on your Home screen, like so:
Note: If you don’t see Cydia after jailbreaking with unc0ver, then reboot and re-launch the unc0ver jailbreak app and keep trying until it works.
That’s all there is to it. You now have a jailbroken handset by way of unc0ver.
Have you tried unc0ver to jailbreak your iOS 11 or 12 device yet? Share in the comments section below.