Guide

Tutorial: Jailbreak iPhone 4.1 with PwnageTool

Sébastien Page ∙ October 20, 2010

This guide and tutorial will show you how to use the freshly released PwnageTool to jailbreak your iPhone 4, iPhone 3GS, or iPhone 3G. There has been a couple jailbreak tools for iOS 4.1 released recently but only PwnageTool will preserve your baseband allowing you to update to a jailbroken 4.1, while still preserving your baseband so you can unlock.

PwnageTool is available for Mac only. If you don't have a Mac, try to find a friend who does, and simply use his computer to cook the firmware. This guide was written using an iPhone 4 but the steps are the same, no matter what iPhone model you have (only the firmware downloaded will change).

This being said, make sure to follow this guide to jailbreak your iPhone iOS 4.1 with PwnageTool. As always when hacking your iPhone, you are proceeding at your own risks...

Jailbreak Your iPad with GreenPois0n [Guide]

Sébastien Page ∙ October 12, 2010

This guide will show you how to jailbreak your iPad iOS 3.2.2 using GreenPois0n, the latest jailbreak tool by the Chronic Dev Team. If you have already jailbroken your iPad with LimeRa1n and it is working fine for you, then there is no need to jailbreak again using GreenPois0n.

At the time I am writing this, GreenPois0n is for Windows only, although a Mac version should be available soon.

Step 1: Download GreenPois0n and run it as an administrator.

Step 2: Power off your iPad, and connect it to your PC.

Step 3: Walk through the steps to put your iPad into DFU mode to prepare for jailbreak.

Step 4: Once you’re in DFU mode, click the ‘Jailbreak!’ button to jailbreak your iPad.

Step 5: Now, just wait until the status bar shows complete, and your iPad will reboot to the home screen.

Step 7: You should now have a new “Loader” icon on your springboard. Launch Loader. Select Cydia > Install Cydia.

Step 8: One Cydia has successfully been installed, you will be asked if you want to remove Loader. Hit “Remove” and your iPad will automatically reboot.

Your iPad 3.2.2 should now be successfully jailbroken using GreenPois0n. If you have any question or comment, make sure to add them in the comments section below.

Tutorial: How to jailbreak your iPhone Using GreenPois0n

Jeff Benjamin ∙ Updated October 16, 2010

This step by step GreenPois0n guide and tutorial will show you how to jailbreak your iPhone 4.1 using GreenPois0n, the new jailbreak by Chronic Dev Team. This GreenPois0n guide will work for the iPhone 3GS, iPhone 4, iPad, iPod Touch 3G, and iPod Touch 4G.

GreenPois0n is is available for Windows, Mac, and Linux.

Although we encountered a few issues here and there, we were able to jailbreak our iPhone 4 successfully using greenpois0n. Once you get around a few hiccups, the process really isn't all that difficult.

Check inside as we step through the jailbreak process with greenpois0n using a Windows machine. The steps are exactly the same no matter what platform you use.

How to Jailbreak your iPad with LimeRa1n

Sébastien Page ∙ Updated January 24, 2016

Geohot just released LimeRa1n, a jailbreak for all iDevices including the iPad. This step by step guide and tutorial will show you how to use LimeRa1n to jailbreak your iPad iOS 3.2.2.

LimeRa1n is still very buggy and I don't actually recommend using it, so proceed at your own risks...

Step 1: Download LimeRa1n from our here.

Step 2: Plug your iPad in and launch LimeRa1n then click “Make it Ra1n”.

Step 3: Follow the onscreen instructions: hold the Home and Power button together.

Step 4: Release the Power button.

Step 6: LimeRa1n will have your iPad enter DFU mode and will then work its jailbreak magic.

Step 7: Your iPad is almost jailbroken and you should see the following messages.

Step 8: If you don’t see the LimeRa1n icon on your iPad , simply reboot it, then launch LimeRa1n on your iPad and select Cydia to install.

Step 9: Once Cydia is installed, you can uninstall LimeRa1n from the LimeRa1n app on your iPad.

Let us know how it goes for you.

Tutorial: How to Jailbreak your iPhone with LimeRa1n

Sébastien Page ∙ Updated October 14, 2010

Geohot's LimeRa1n jailbreak has been released, and even though it comes with its fair share of downsides, it does work for some people. Thanks to iDB reader Whammy who send me screenshots of LimeRa1n in action, we're now able to get a tutorial for you.

This step by step guide and tutorial will show you how to use LimeRa1n to jailbreak your iPhone iOS 4.1. LimeRa1n will jailbreak the iPhone 3GS, and iPhone 4. It will also jailbreak the iPod Touch 3G and iPod Touch 4G. As usual, proceed at your own risks.

This tutorial was done with a PC but LimeRa1n will also work if you have a Mac, and the steps will the exactly the same.

How to Jailbreak iPhone 3G iOS 4.1 with RedSn0w

Sébastien Page ∙ October 8, 2010

Up until now, RedSn0w 0.9.6 beta 1 only worked on Mac, but the Dev Team just updated the infamous RedSn0w jailbreak which is now compatible with Windows. This step by step guide and tutorial will show you how to jailbreak your iPhone 3G 4.1 using RedSn0w for Windows.

It's important to note that if you've already updated to iOS 4.1 you will not be able to unlock your iPhone. If you do need to unlock and if you're not on iOS 4.1 yet, I suggest you wait for the release of PwnageTool, which will allow you to update to 4.1 while preserving the baseband, thus enabling you to use UltraSn0w to unlock.

This tutorial is for the iPhone 3G only. If you have an iPhone 3GS 4.1 that you want to jailbreak, you're going to have to wait from Comex's next jailbreak. If you have an iPhone 4 on 4.1, you will have to wait until Sunday for the release of GreenPois0n.

The Mac version of this tutorial can be found here. This being said, here is how to jailbreak your iPhone 3G 4.1 with RedSn0w...

How to Downgrade iPad 3.2.2

Sébastien Page ∙ Updated January 24, 2016

This step by step guide and tutorial will show you how to downgrade your iPad iOS 3.2.2 to a previous iOS version. In order to downgrade your iPad from 3.2.2 to 3.2.1, you will have to have your SHSH blobs on file on Saurik's servers. If you do not have these SHSH blobs on file, you will not be able to downgrade.

Downgrading iPad iOS 3.2.2

How to Downgrade iPhone iOS 4.1

Sébastien Page ∙ September 8, 2010

iOS 4.1 is now available for download, and I'm pretty sure some of you will "accidentally" update to 4.1 and will want to downgrade back to iOS 4.0.1, which is the latest jailbreakable and unlockable iOS (at least at the time I'm writing this).

This simple guide and tutorial will show you how to downgrade your iPhone iOS 4.1 to iOS 4.0.2, or 4.0.1, or iOS 4, or any earlier version. The steps are the same no matter what iOS you want to downgrade to.

How to Install Android on Your iPhone 2G or 3G with iPhoDroid

Sébastien Page ∙ August 19, 2010

Android on the iPhone is more of a "project" than anything else. It's buggy, unstable, and doesn't even bring all the features needed to fully use the iPhone. So why in the hell would you install Android on your iPhone? Just for the heck of it, of course! Thanks to Sergio McFly, this is now easily possible.

iPhoDroid 1shot is probably the easiest way to install Android on your iPhone 2G or iPhone 3G. It doesn't require any file editing or anything that might scared the least technically advanced of us. Without further ado, here are the instructions to set up Android on your iPhone. As usual, proceed at your own risks...

Step 1: Make sure your iPhone is jailbroken and Cydia is up to date. If it's not jailbroken, do so by using JailbreakMe.

Step 2: Download the latest version of iPhoDroid 1 shot from here. The download link is at the very bottom left of the page.

Step 3: Make sure your iPhone is connected to your computer via the USB cable. Launch iPhoDroid and click "shoot".

Step 4: iPhoDroid will extract the touch driver and transfer the cache/system/data folders to your iPhone.

Step 5: iPhoDroid will now place your iPhone in recovery mode.

Step 6: After that, you will get the OpeniBoot splash page with different options (Apple, Android, Install, Uninstall). Use the volume buttons to highlight the "Install" option, then tap the Home button to select it.

Step 7: Some code will then be running on your screen. Once done, your iPhone will reboot in the Android OS.

Done! You can now enjoy your crippled iPhone running Android.

If you're one of the few courageous men out there to try this hack, please let us know how it's working for you by leaving a comment below.

[iClarified]

How to Downgrade iPhone 4.0.2 to 4.0.1

Sébastien Page ∙ Updated August 22, 2010

This step by step guide will show you how to downgrade your iPhone iOS 4.0.2 to iOS 4.0.1. These steps are pretty simple but there is one major requirement: you must have your SHSH files saved on Saurik's server. There is absolutely no way around it. If you don't have your SHSH, you won't be able to downgrade your iPhone.

In this tutorial, we will see how to downgrade the iPhone from 4.0.2 to 4.0.1 but the steps are the same if you want to downgrade to iOS 4 or even 3.1.3.

There are several methods used to downgrade the iPhone. We will learn the method that uses TinyUmbrella. No file editing will be necessary.

How to Downgrade from iOS 4.0.2 to 4.0.1

Step 1: Let's download your SHSH blobs from Saurik's server to your computer. To do so, download TinyUmbrella and plug your iPhone in. Select the "Advanced Options" box. Also select the firmware version to which you wish to downgrade. Finally, select "Cydia" under "Request From". Then hit "Save My SHSH". This will grab your SHSH files from Saurik's servers and save them on your computer.

Step 2: Download the firmware to which you wish to downgrade to from our iPhone downloads section. Save it to your desktop.

Step 3: Put your iPhone in DFU Mode. To do so, launch iTunes and plug your iPhone in. Press and hold the Home and Power button together for 10 seconds. After 10 seconds, release the Power button while still holding the Home button until iTunes pops up and says it has found an iPhone in recovery Mode.

Step 4: Run TinyUmbrellaand click the "Display SHSHs" button to make sure your SHSH blobs were downloaded to your computer. Once done, click "Start TSS Server".

Step 5: Now we're going to restore to the firmware you want. To do so, launch iTunes and plug your iPhone in. Hold to SHIFT key (Windows only) or ALT/Option key (Mac only) while clicking on Restore. Make sure you hold the key while clicking Restore. A window will open. Simply select the firmware you downloaded in step 2.

Step 6: Your iPhone will start the restore process. You will most likely get several errors (error 1011, 1013, and 1015) but that's ok, don't worry about those.

Step 7: Finally, we need to get your iPhone out of recovery mode. To do so, simply click "Kick Device Out of Recovery" in TinyUmbrella.

Done!

You should now be back on a previous iOS, giving you the ability to jailbreak and unlock.

Jailbreak & Unlock iOS 4.0.2 on iPhone 3G

Sébastien Page ∙ Updated September 27, 2010

Those of you who own an iPhone 3G or an iPod Touch 2G (non-MC model) can jailbreak/unlock iOS 4.0.2. To jailbreak your iPhone 3G 4.0.2, you will have to use RedSn0w 0.9.5b5-5.

How to Jailbreak iPhone 3G iOS 4.0.2

Step 1: Make sure you have the latest version of iTunes installed (iTunes 9.2).

Step 2: Download iOS 4 (not iOS 4.0.2) for iPhone 3G to your desktop from our iPhone downloads section.

Step 3: Update your iPhone to iOS 4.0.2 via iTunes.

Step 4: Download the latest version of RedSn0w from here.

Step 5: Point RedSn0w to the iOS 4 (not 4.0.2) you downloaded in step 2.

Step 6: Select “Install Cydia”.

Step 7: Follow the onscreen instructions.

Step 8: Let RedSn0w do the hard work for you. Once jailbroken, your iPhone will reboot.

How to Unlock iPhone 3G iOS 4.0.2

Since iOS 4.0.2 didn't update the iPhone baseband, you can still use UltraSn0w to unlock your iPhone.

Step 1: Jailbreak your iPhone using the method described above.

Step 2: Go to Cydia and search for UltraSn0w. If it’s not there, you might have to add the following repo: repo666.ultrasn0w.com

Step 3: Install UltraSn0w.

Step 4: Reboot your iPhone.

Tell us how it goes for you by leaving a comment below.

[Thanks Bruce for the tip]

How to Jailbreak Your iPad iOS 3.2.1 with JailbreakMe

Sébastien Page ∙ Updated January 24, 2016

There's a new jailbreak in town and its name is JailbreakMe. Jailbreak me will jailbreak your iPad running iOS 3.2.1 or lower in less time than it takes to say it.

JailbreakMe is what we call a browser-based userland jailbreak. It can be done directly from your iPad and doesn't require a restore or anything like that. This tutorial will show you how to jailbreak your iPad 3.1.2 using JailbreakMe.

Step 1: Make sure that you have backed up your iPad in iTunes. If something goes wrong, you can always restore.

Step 2: On your iPad, go to www.JailbreakMe.com.

Step 3: Slide the "Slide to Jailbreak" thinggy and let JailbreakMe work its magic.

Step 4: After a minute or so, you will get a pop up saying that Cydia was installed on your iPad.

Step 5: Reboot. Done!

Wasn't that easy?