It’s finally here, folks! Comex has released the highly anticipated JailbreakMe 3.0, code named Saffron. The web-based jailbreak works on all iDevices, including the iPad 2, on iOS 4.3.3, and iOS 4.3.3 only for the time being.

This userland jailbreak is super easy to perform straight on your iDevice, and Comex’s PDF exploit will give you an untethered jailbreak for the iPad 2 via Mobile Safari.

Head over to JailbreakMe dot com to jailbreak your iDevice with the new tool. A huge thanks is due to Comex and the beta testers that have been working hard on this project for months.

Despite Comex’s exploit leaking online this past weekend, JailbreakMe 3.0 has prevailed and is now available for everyone to use in Safari on iOS.

According to the Dev Team, so far, JailbreakMe Saffron is compatible with:

  • iPad 1: 4.3 to 4.3.3
  • iPad 2: 4.3.3
  • iPhone 3GS: 4.3 to 4.3.3
  • iPhone 4: 4.3 to 4.3.3
  • iPhone 4 CDMA: 4.2.6 to 4.2.8
  • iPod touch 3g: 4.3, 4.3.2, 4.3.3
  • iPod touch 4g: 4.3 to 4.3.3

Comex has said that iOS 4.2.1, 4.3.1, and 4.3.2 should be added to JailbreakMe 3.0’s compatibility list at a later date.

We already have a JailbreakMe tutorial ready and a video walkthrough for you guys should be up very soon, so stay tuned. In the meantime, happy jailbreaking!

Let us know how JailbreakMe 3.0 works for you in the comments below.

Update: And JailbreakMe.com is now down again. Apparently Comex had to fix something for the jailbreak to run smoothly. Check back soon!

Update 2: And it’s back! Good luck

  • iPhone 3GS new bootrom, baseband 05.13.04 on firmware 4.0.1. Can someone please let me know if i can UNLOCK using ultrasnow if i upgraded to 4.3.3 and jailbroke it using the new comex’s jailbreakme ?
    Thank you

    • Zack

      yah, you can unlock, just use custom pwnagetool firmware or snowbreeze firmware and restore with that to preserve the baseband. Then unlock with ulrasn0w in Cydia

  • RanKer

    I love Comex, He’s the Best!! 😀

  • I think it was stupid not having 4.2.1 in 3.0 now

  • Rebby

    This JB compatible with any idevices firmware 4.3. To 4.3.3 except ipad 2 only for firmware 4.3.3 .
    If you have ipad 2 you need to upgrade to firmware 4.3.3 first and redo it again.
    If its gives you flashing error message and your safari keep crashing , turn you idevices off and turn it back on because you might use it browsing before and from my experience it should be webcaching free or fresh start . If this JB still not working for you that mean this is not for you and just keep your idevice that way Good Luck..

  • tim

    Fails …. ip4 4.3.3
    JB all the ways FINE
    When Istalled Bitesms and receive sms HANG LAG …unable to Boot or restart…

  • @CristalRenee

    I upgraded to 4.3.3 and restarted when I try to do the jailbreak Cydia says installing and then half way thru the logo is gone….. Any suggestions?

    • kaven

      Finally someone that have the same problem. I really don’t know how to solve this. The only possible thing i can think about is that i activated multi gesture on windows.

    • Vic

      Hi i’m having the same problem too

    • Vic

      Awesome it works after restoring the phone

  • PRIVATE

    i was downloading winterboard n when i was done i went into the app n i relized it wasnt what i thougt it was so went into cydia n clicked uninstall i think on winterboardn my ipod started to reboot n it would show the apple then a white screen n it kept doin that so i pluged it into the computer n put it in dfu mode now i have to restore my iPod 🙁 🙁

  • Manu

    This JB is Unthetered right?

  • @CristalRenee

    Yes it is

  • lalu

    guys i realized that this uses more system mem like 8X more then the computer one when i did it with rednow i had 10.8% system space free and when i did it with jailbreakme it only had .8% free this is bad because it will slow the processes down the partion as a whole is 700 MB something and ios uses a lot not recommended for iphone 3gs

  • Hi guys 4.3.3 when is Curia install we can unlock?

  • jamie

    Download cydia for my ipad 2 and its been fine, then I added bitesms and all my apps are tiny and if I click on any the ipad reboots 🙁

  • jerald

    those who install until half disappear, i try many ways, finally i made it. previously you guys jail break it in the older version and you guys didn’t jail it back before update to 4.3.3. that why happen to me. in the end i restore my iphone without backing up & try jailbreak again. it work. so hopefully this help.

    • willliam1986

      thank you to figured it out~~~ i will try it.

  • ian

    How about iPhone 3G Firmware 4.2.1 ? is there any possibility that comex would add iPhone 3G on the lists?

  • ian

    How about iPhone 3G Firmware 4.2.1 ? is there any possibility that comex would add iPhone 3G on the lists??

    • Singa

      JailbreakMe works for all iDevice—But–>>>Comex has said that iOS 4.2.1, 4.3.1, and 4.3.2 should be added to JailbreakMe 3.0′s compatibility list at a later date.

    • Singa

      Jailbreakme works for all iDevice—But–>>>Comex said soon for 4.2.1 to 4.3.2

      • ian

        itdoesnt work on iphone 3g 4.2.1

      • ian

        it doesnt work on iphone 3g 4.2.i

  • Moshi30

    I would like to ask if this jailbreakme will update the baseband? I have an at&t phone on 4.0 that’s been jailbroken and unlocked baseband 1.59.00. I would like to use this new jailbreakme to upgrade to 4.3.3 but will i lose the ability to unlock?

    • Singa

      I suggest you use PwnageTool,this method Jb of PwnTl will preserve your bb.so far i4 unlock is available only up to bb 1.59.00. The Dev-Team not giving us new unlock yet

  • TX.R

    Good job…
    T

  • Anthony Bowman

    Is anyone else having issues with safari connecting to the internet through a wifi network after jailbreaking?

  • frank

    i have the same issue as cristal renee ” I upgraded to 4.3.3 and restarted when I try to do the jailbreak Cydia says installing and then half way thru the logo is gone…”.. Any suggestions

    yes my ipad was also previously JB ..
    now im on 4.3.3
    all the apps installed earlier thru installous work fine tho..except now i dont have cydia or installous

    • Mikestrok

      I having the exact same problem with frank..
      Upgraded from 4.2.1 to 4.3.3, try JailbreakMe 3.0.. Cydia stop half way installing and disappeared.
      The funny things is all the apps installed earlier are working, but Cydia and Installous are gone..
      What should i do now?

  • August

    Does this jailbreakme 3.0 supports Multi gestures after having jail broken it? Those who have already jail broken your device with this Jailbreak Me 3.0, can u guys tried it out and reply me. Thanks

  • iXanczy

    Yess, at least an iPad2 jailbreak!

  • BaEbri

    I have a jailbroken (Snowbreeze and Redsnow) iPhone 4 with iOS 4.3.3 on 04.10.01 firmware. My concern is how to unlock this phone I could not use since I bought it. Can JailbreakMe do the magic of unlocking this phone for me when I install it?

  • August

    Is Multi gestures available in iPad after jail breaking it? Can someone please try it out? Thanks

  • I hope it is available for 4.2.1 soon I’m so exited!!

  • LasLajasGto

    DOes anyone know the exact time of release

  • Bryan McHenry

    WTF? It downloaded ok, now it’s frozen and my iPhone 4 wont boot up past the Apple logo. Any help???

  • Mikestrok

    Finally, I figured it out somehow.. This is what to do to restore my phone:

    1. Connect your iPhone to your PC and run iTunes.
    2. Reset your iphone by holding home button and lock button for 10 sec.
    3. When you see the Apple logo you should hold home button for about 5-10 sec and you will see your iPhone in iTunes.
    4.Launch JailbreakMe 3.0 using Safari, hit Free -> Install.. DONE..

    Hope this help..

  • Noname

    Once again do not install BITESMS ……. When using jailbreak me !!!!!!!!!
    iPad not sure but iPhone have big problem….

    Bitesms …bite my ip4. 4.3.3

    I’m sure and confirm bitesms kill ip4 4.3.3 (jailbreak me.com)

    I restore two times and try , is confirm cannot accept Bitesms

    Third restore jb with redsnow rc16 then back to normal.

    By the way I haven’t try my iPad2.

    Hope jailbreak me stable for Ipad2…..

  • Damian

    No!!! En absoluto no es bueno yo lo baje y mi iphone4 ya no funcionava… Lo bueno q tenia seguro no se los recomiendo???

  • Damian

    No! Not good at all down and I no longer worked my iphone4 .. The good q had not recommend it safe??

  • dhruv

    THANKS COMEX!
    iPad 2 jailbreak worked like charm 😀 😀

  • John

    I just went to the website and only get a message that says I have to downgrade my software because the only version is jailbreak me 2.0. Anyone know what’s going on with that?

  • Rupinhol

    Everyone Must Follow Mikestrok instructions. As u See it Works Best on a clean restore. back up your shit using iTunes, do a full system restore, jailbreakME!, re-sync your data back in. If you cant follow this you are just too freaking dumb! Go get a Nokia 6300 or something LOL!

  • Rupinhol

    Everyone Must Follow Mikestrok instructions. As u See it Works Best on a clean restore. back up your crap using iTunes, do a full system restore, jailbreakME!, re-sync your data back in. If you cant follow this you are just too freaking dumb! Go get a Nokia 6300 or something LOL!

  • Mobstatusxx

    WTF.my iPhone 4 it wont reboot after when I got cydia I opened cydia and it didn’t do nothing then when I tried to turn it on now it’s not rebooting x( help please

  • Eb

    Installed Cydia. The phone crashed and reboot. The phone is an iPhone 4 CDMA at 4.2.6. The reboot is not passing the apple screen and has been like this for an hour. Tomorrow I will try to do DFU and the kick it of DFU some how? Any ideas to reboot so I can back up some info.

    Thanks

    • Singa

      Have you try:hold both power & Hm button till apple logo appear & let go both?. Otherwise do: hold Hm button & connect to iTunes.on this mode,you probably can back up your iPhone.
      Using JailbreakMe you need to Clear History/Cache/Cookie & on Safari->>Clear all in Safari & Jb it. The 4.2.6 for ViPhone can be Jb using GP:–>>>

      Verizone iPhone 4.2.6 /7
       
      >>>>>GP RC5b4 JB ViPhone 4 4.2 (4.2.6) for Verizone iPhone –>>>  

      gp_win_rc5_b4.zip (1.12 MB) http://www.mediafire.com/?42dpow4b44oib2z For Mac:gp_mac_rc5_b4.zip (1.09 MB) http://www.mediafire.com/?6btb7bsnx1236l0
      

      for Unlock ->>UltraSn0w it’s been out too for ViPhone 4.2.7 by adding Repo : cydia.pushfix.info & u’ll find UltraSn0w 4.2.7 

      —>>>You can install the “Verizon Untether for 4.2.7” by adding the: 

      http://cydia.pushfix.info

      repo to Cydia. iH8Sn0w and Pushfix have released a Cydia package to untether your currently tethered Verizon 4.2.7 iPhone. This package will work for those who have jailbroken by pointing RedSn0w to the 4.2.6 ipsw. iH8Sn0w has also released Sn0wBreeze 2.6.1 with support for the iOS 4.2.7 untether: 
      http://ih8sn0w.com/index.php/welcome.snow

  • a

    i jailbroke my iphone and thhe phone icon disappeared

    • Singa

      More info: i4 4.3.3 ?. Just a suggestion,the jailbreakme.com it’ll do ok,but still having issue till now. I suggest to use other method of Jb by using PwnageTool / Redsn0w / Sn0wBreez for 4.3.3 & under. Remember: if u need to upgrade see my prev notes (link all iOS & Jb’s) in this forum to Dwnld in u’r desk top.

  • Sami

    Is there’s any approximation idea when untethered JB version is gonna come out for 4.3.5?
    Due to stupidity I updated my wire-frame without making sure =S

    • Singa

      Yes,if u save SHSH then Downgrade to 4.3.3 or lower. Read my previous notes,I hv all intruction & links.

      • Sami

        Actually Im Noob, and all recommended that If I know nothing about it, better not to miss with it! I’m just asking about the approximate date of Untethered HB version for 4.3.5?

  • Singa

    @Sami,No..but Dev-Team Already gv us to How to Downgrade iOS 4.3.5 or 4.3.4 to 4.3.3 (which Untethered JB) or below…if u need Untether JB Now,use Dwngrd to 4.3.3 or bellow by Editing the Host File (Read my Previous Notes in this forum)..

    • Canute

      I had to restore my phone with ITunes and now I’m on 4.3.5 and 4.10.01. I was unlocked on 4.01 and 1.59 baseband couple days ago through jailbreakme and ultrasnow. Can I down grade to jailbreak and how would I do this?

  • sweet

    I have an iphone4 4.3.3 with BB1.59.00 already JB and unlock! But it seem like there’s a problem with my phone, so i would like to rejailbreak and unlock it. Should i use jailbreakme 3.0 to jailbreak? Will that upgrade my BB? Or should i just stay with snowbreeze?

  • Guest

    Hi ,I want to have cydia as soon as I can please thank for u !!!!!!!! For the I phone not IPad .